Plastic or wood. Cut to your size.
Acrylic, polycarbonate, PVC foam, HDPE, birch plywood and MDF, cut to the millimetre. Hold one up to the light, then size it.

- One piece
- 1.43 kg
- All 4
- 5.71 kg
- From one sheet
- 12
- Sheets
- 1
Eight sheets, two families
Six plastics for light, water and knocks; two woods for furniture and paint.
| Sheet | Against the light | Good for | Outdoors | Thickness, mm |
|---|---|---|---|---|
| Clear acrylic | See-through, as clear as glass | Splash backs, covers, display cases, picture glazing | Yes | 3 · 5 · 8 · 10 |
| Opal acrylic | Lets light through, hides what is behind | Light boxes, lamp diffusers, privacy panels | Yes | 3 · 5 |
| Smoked grey acrylic | See-through, a shade darker | Dust covers, screens, shop fittings | Yes | 3 · 5 |
| Clear polycarbonate | See-through, and very hard to break | Machine guards, shed and greenhouse glazing | Yes | 2 · 4 · 6 |
| White PVC foam | Solid white, light to carry | Signs, display boards, model making | No | 3 · 5 · 10 |
| Black HDPE | Solid, with a waxy surface | Chopping boards, wear strips, wet places | Yes | 6 · 10 · 15 |
| Birch plywood | A pale face and a striped edge | Shelves, furniture, boxes, wall panels | No | 6 · 9 · 12 · 18 |
| MDF | Smooth and even, ready to paint | Painted doors, cabinets, templates | No | 6 · 12 · 18 |





From full sheet to your piece
Your sizes or your drawing
Type the finished size, or upload a drawing for shapes, holes and curves.
Nested on the sheet
Pieces are laid out on the 2440 × 1220 sheet to waste as little as possible. The 4 mm saw cut comes out of the sheet, not your piece.
Cut
Straight pieces on the panel saw; shapes and holes on the CNC router.
Edges
Sawn clean. Acrylic edges can be polished until they are as clear as the face.
Packed flat
Plastics keep their protective film on until the piece is in place.
Three ways to order
Plastic, by size
Choose the plastic, the thickness and the size, and see the price before it goes in the cart.
Plastic sheets →Wood, by size
Plywood or MDF to your size, with edging where you want it.
Wood sheets →Any shape, from a drawing
Upload DXF, DWG, PDF, SVG, STEP, IGES, STL, up to 50 MB, for curves, holes and cut-outs.
Upload a drawing →
Before you cut
Which size do I type?
The finished size of the piece. The saw cut is taken from the sheet around it, not from your piece.
Can you cut shapes and holes?
Yes. Upload a drawing (DXF, DWG, PDF, SVG, STEP, IGES, STL) and the shape is quoted from it.
Acrylic or polycarbonate?
Acrylic is clearer and polishes to a glassy edge. Polycarbonate is far harder to break, for guards and glazing that will get knocked.
Why is the plastic covered in film?
It keeps the face free of scratches while the sheet is cut and sent. Peel it off once the piece is fitted.
Can plywood and MDF go outside?
Not as they come: they take in water. Outdoors, choose acrylic, polycarbonate or HDPE, or seal the wood all round.
What if my piece is bigger than a sheet?
Pieces up to 2440 × 1220 mm are cut from one sheet. For anything larger, send a drawing and we look at joining or larger stock.
Your size. Any sheet.
Pictures from Wikimedia Commons: Various tools hanging on a pegboard in a workshop setting, Shixart1985, CC BY 2.0; Laser cut acrylic parts for PartyLand Remake pinball machine, Felipe Sanches, CC BY-SA 2.0; Twinwall Polycarbonate Sheet, MaterialScience100, CC BY-SA 4.0; Plywood, Rotor DB, CC BY-SA 3.0; MDF Sample, Vaderluck, CC BY-SA 3.0; Fulcrum Acoustic CNC Nesting Router, ChazGoodman, CC BY-SA 4.0.